Bell & Ross launched a BR-X2 Micro-Rotor Tourbillon wristwatch last year while this year it created a new one which is developed on basis of that one. The ultramodern copy Bell & Ross has abandoned all the unessential elements, retaining the most important essence, promoting the transparency to a new extreme.
When you wear the Bell & Ross Experimental replica with stainless steel case, you will feel like just wearing the movement instead of the wristwatch. The 42 mm polished steel case is just like a ultra thin plywood that is engraved between the transparent sapphire crystals from both sides. All the distinctive elements have been fastened by the four screws into the iconic style of the brand – the square case and inner round dial.
There isn’t a real dial on the 42 mm knockoff watch. The sapphire crystal makes up a round area and the hands on the plywood of movement form the dial and minute/hour hands. Tourbillon has been set at 6 o’clock while the movement could provide a power reserve of 50 hours.
Bell & Ross has been well-known all over the world with its revolutionary technology especially the design aesthetics and sophisticated technique of military and aerospace science and technology. The innovative high resistance titanium is much lighter but offering greater resistance to the scratching. The method to craft this material is different from the general titanium.
The movement of 45 mm Bell & Ross knockoff has continuously inherited the iconic feature of Bell & Ross Experimental and from the caseback you can enjoy the operation of the extraordinary movement. It could also be seen from the colored sapphire crystal.
Bell & Ross released a BR-X1 Skeleton Tourbillon Sapphire wristwatch with advanced technology and high level of watchmaking craftsmanship, improving the transparent structure of wristwatch to a upper level, continuing the legend of the brand. The sapphire crystal is not only with the great robustness and practicability, but also owning unique aesthetics. When it is adopted in the watches as its case, you can appreciate the structure inside of the 45 mm Bell & Ross fake watch and the precise movement, entirely presenting the essence of the timepiece without any reservation.
The layout of the functions of Bell & Ross Experimental knockoff watchwith sapphire case is distinctive too. The off-centered hour hand and minute hand have been equipped on the spring, leaving more space to present the Tourbillon and the movement. The flying tourbillon carefully developed by Bell & Ross is “floating” in the air attractively. Maintaining the traditional watchmaking craftsmanship, the watchmaker removes the excess metal of the movement with extraordinary hollowing technology, and with the design details and decoration of the times, it presents the clear and crystal beauty of the wristwatch.
The innovative imitation watch was released with a limit amount of 8 pieces and the manual winding mechanical movement provides a power reserve of 100 hours.
The BR-X1 White Hawk of Bell & Ross, the professional pilots watch brand, in France is meaning the dream and travelling which is in line with the position of the professional pilots military watches of the brand. Inspired by the color of the private plane, the Swiss copy Bell & Ross Experimental BR-X1 White Hawk presents the high level of watchmaking techniques.
The Bell & Ross imitation with titanium case has been equipped with a protective matt white ceramic bezel, which has reduced the reflection along with the satin blasted finish. The elegant color-matching of gray and white is inspired by the color of the most beautiful private plane at present. The chronograph pusher made from high-tech ceramic has been coated with anti-slide gray rubber, while the gray rubber has been also engraved at 9 o’clock, making it convenient to operate.
The red 30-minute counter has been set at 9 o’clock which is in contrast to the black background, guaranteeing the great legibility. It should be considered as the best partner for the pilots when flying in the sky. Bell & Ross BR-X1 White Hawk is avant-garde in design and color matching, exuding the powerful individuality and sense of the times, demonstrating the exquisite watchmaking techniques excellently. The fake watch with gray calfskin strap is water resistant to a depth of 100 meters.
Bell & Ross Experimental collection always has square cases of different materials and decorations. This collection has complicated mechanisms and functions, drawing much attention of watch lovers. The brilliant Bell & Ross Experimental replica watches have 45mm square cases which are made from titanium and ceramic materials. The oversize cases have a good sturdiness and water-resistance at the same time.
The square cases make people feel reliable and stable. Their sapphire dials are grey and transparent. Wearers can see more details clearly through the unique dials. Then their hour markers are applied luminescent indexes. A date indicator is set at 6 o’clock. The central hollowed hour and minute hands also have white luminescent plating. There are two chronograph hands on the whole dial. And both of them all have red tips. One is in the center and another is set in the 30-minute chronograph sub-dial at 9 o’clock.
Bell & Ross copy watches with grey sapphire dials are driven by precise Swiss mechanical movements with a high frequency. The excellent automatic movements have a long-lasting and stable power reserve. The wrist watches are also carried with energetic and youthful design elements, appealing to lots of modern and young males.
Bell & Ross Experimental collection has lots of eye-catching designs. Today, I pick one Experimental model to make a brief introduction. The fancy Bell & Ross Experimental replica watches are very unique and look cool. I believe that lots of young and fashion people would be interested in this model. The whole cases are square and made from sapphire. So we can know that the cases are transparent. Their round dials are also made from sapphire.
The main dial is off the center to 12 o’clock. There are small white indexes as hour markers. Their black hour and minute hands are carried with white luminescent plating. Then there is a skeleton tourbillon set at 6 o’clock. The tourbillon device is used to offset the influence of gravity. People can see more details about inner structures. The innovative Bell & Ross fake watches are driven by Cal. 288, hand-wound mechanical movements with 20 jewels. Their power reserve is long-lasting and stable, up to 100 hours.
Bell & Ross copy watches with black hands have 45mm square sapphire cases with translucent rubber straps. The accurate mechanical movements can support precise and practical functions. The timepieces have exquisite and special appearances, persistent and reliable performances, drawing much attention of male customers who like modern fashion styles.
Experimental collection has the beauty of complicated mechanisms. The products always display the advanced technologies and industrial feelings. The delicate Bell & Ross Experimental copy watches have 45mm square cases which are made of 18k rose gold and black ceramic. There are also some rubber inset in them. The magnificent cases are solid enough to protect the movements and firm enough to be waterproof to 100m deep.
The strong Bell & Ross Experimental replica watches are driven by Cal. 313, self-winding mechanical movements with 56 jewels. The skeleton movements can vibrate 28,800 times one hour. Their power reserve is long-lasting and stable. Their rose gold indexes are all covered with white luminescent plating. The central skeleton hour and minute hands also have luminescent coatings. A small date indicator is set at 6 o’clock. Their 30-minute chronograph sub-dial is set at 9.
Besides, their seconds function is displayed by a sub-dial at 3 o’clock. Bell & Ross fake watches with Swiss automatic movements use grey sapphire crystal as the dials. So the inner structures can be seen very clearly. The tough styles and energetic feelings are all appealing to male customers. The timepieces will look glossy on the wrists.